Nortel Networks BCM1000 manual Station media bay modules, Station modules

42Chapter 2 Telephony hardware

Station media bay modules

You install the station media bay modules in the BCM1000 or the BCM1000e. Station media bay modules connect telephones and analog telecommunication devices to the Business Communications Manager system.

Table 5 provides a list of the station modules that can be used on the Business Communications Manager system:

Table 5 Station modules

Module type	What it does	Availability
DSM 16	Connects a maximum of 16 digital
“Digital Station media bay module”	telephones
DSM 32	Connects a maximum of 32 digital
“Digital Station media bay module”	telephones to the Business
	Communications Manager system.
4X16	Connects a maximum of four CLID lines	Only available for North American
Combination 4-line CTM and	for a maximum of 16 digital telephones	systems. This module can be
		combined with CTMs on the same
DSM16 (4x16) Media Bay Module
		DS30 bus. Also refer to “Caller ID
“4X16 media bay module”
		Trunk media bay module” on page
		40.
ASM8	Connects a maximum of eight analog	Only available for North American
“Analog Station media bay	devices to the Business Communications	systems. You can add a maximum of
module” on page 44	Manager system.	two ASMs to your system.
ASM8+	Connects a maximum of eight analog	North American and UK systems.
(introduced with BCM 3.6	devices, providing caller ID pass through,
	message waiting indication, and
software)
	disconnect supervision at the telephone.
	Module also provides ability to download
	new firmware.

P0609324 01