Nortel Networks BCM1000 manual DSM wiring chart, Sets Pin Wire color Port 1st 2nd

Chapter 10 Wiring the modules 137

Table 34 and Figure 57 provide the wiring scheme for the DSM 16, 4X16 and DSM 32 modules. The Sets heading indicates the position of the set on the BIX block. Set DNs are allocated by the Business Communications Manager based on the DS30 bus setting on the station module.

Figure 57 Wiring for DSM 16, 4X16, and DSM 32

		25-pair connector
	T=Tip	1 R	26 T
	R=Ring	2R
			27T
		3R	28T
		4R
DSM 16, 4X16			29T
		5R
			30T
		6R
			31T
		7R	32T
		8R	33T
		9R	34T
		10R
			35T
		11R	36T
		12R	37T
		13R
			38T
		14R 39T

15R 40T

16R 41T

DSM 32

The second 25-pair connector is wired in the same sequence as the first one

Table 34 DSM wiring chart

			Sets	Sets
Pin	Wire color	Port	1st	2nd
26	White-Blue	X01	1	17
1	Blue-White	X01	1	17
27	White-Orange	X02	2	18
2	Orange-White	X02	2	18
28	White-Green	X03	3	19
3	Green-White	X03	3	19
29	White-Brown	X04	4	20
4	Brown-White	X04	4	20
30	White-Slate	X05	5	21
5	Slate-White	X05	5	21
31	Red-Blue	X06	6	22
6	Blue-Red	X06	6	22
32	Red-Orange	X07	7	23
7	Orange-Red	X07	7	23
33	Red-Green	X08	8	24
8	Green-Red	X08	8	24
34	Red-Brown	X09	9	25
9	Brown-Red	X09	9	25
35	Red-Slate	X10	10	26
10	Slate-Red	X10	10	26
36	Black-Blue	X11	11	27
11	Blue-Black	X11	11	27
37	Black-Orange	X12	12	28
12	Orange-Black	X12	12	28
38	Black-Green	X13	13	29
13	Green-Black	X13	13	29
39	Black-Brown	X14	14	30
14	Brown-Black	X14	14	30
40	Black-Slate	X15	15	31
15	Slate-Black	X15	15	31
41	Yellow-Blue	X16	16	32
16	Blue-Yellow	X16	16	32
42-40	no connections
17-25

Installation and Maintenance Guide