Nortel Networks manual BCM1000 LEDs, BCM1000 operational LEDs

Chapter 1 Introducing the Business Communications Manager 25

BCM1000 LEDs

A line of 10 operational LEDs display on the face of the BCM1000. Refer to Figure 8. These LEDs show the current state of various hardware components.

Figure 8 BCM1000 operational LEDs

1

PCI devices

Operational LEDs

Power Disk Status PCI Devices Temperature Fan

These LEDs monitor:

•power ( )

•disk drive ( )

•system status ( )

•five PCI power indicators

Note: These LEDs correspond to the cards, not to the PCI slots.

For example, a WAN card uses only one PCI slot, but has the capacity for two connections. In this case, both LEDs stay lit as long as a WAN card is present.

•temperature ( )

•fans ( )

The LED states are described in Table 28 on page 117.

The Unified Manager contains a monitoring tool, that allows you to determine the current condition of the LEDs from your computer. Refer to “Using the System Status Monitor to monitor LEDs” on page 162.

Installation and Maintenance Guide