Nortel Networks BCM1000 manual Tables

		1
Tables
Table 1	Interface harmonized standards	. . 5
Table 1	Basic BCM1000 base unit specifications	. 17
Table 2	Module Power and Status LED states	. 34
Table 3	Trunk media bay modules	. 37
Table 4	DTM LED functions	. 38
Table 5	Station modules	. 42
Table 6	Specialized modules	. 46
Table 7	Determining trunk module requirements	. 58
Table 8	Station media bay modules required	. 60
Table 9	Matching modules to DS30 bus capacity	. 65
Table 10		84
Table 11	Possible media bay module DIP switch settings, single density	. 88
Table 12	Possible media bay module DIP switch settings for double density . . . .	. 89
Table 13	DTM switch settings (T1)	. 91
Table 14	DTM switch settings (North American PRI)	. 91
Table 15	DTM switch settings (E1 and UK PRI)	. 92
Table 16	BRIM S/T switch settings	. 92
Table 17	CTM/GATM4 and CTM8/GATM8 DS30 and offset switch settings	. 95
Table 18	Global Analog Trunk Module DIP switch settings	. 96
Table 19	4X16 switch settings	. 97
Table 20	ASM8 settings for upgraded 2.5 systems and new 3.0 systems	. 99
Table 21	ASM8+ country select dip switch settings	101
Table 22 DSM single density settings for BCM 2.5 systems upgraded to BCM 3.0 or newer
	software 101
Table 23	DSM single density switch settings for new BCM 3.0 (or newer) systems 102
Table 24	DSM 16+ and DSM32+ double density switch settings for 2.5 systems upgraded to
	BCM 3.0 or newer software 103
Table 25 DSM 16+ and DSM32+ double density switch settings for new systems with BCM 3.0
	or newer software 104
Table 26	DECT module settings	105
Table 27	FEM switch settings	106
Table 28	BCM1000 LED states	117
Table 29	DB25 adapter cable	121
Table 30	RS-422/EIA 530 adapter cable	122
Table 31	V.35 Adapter Cable	122
Table 32	DB15 X.21 adapter cable	123
Table 33	Serial port pinout	125
Table 34	DSM wiring chart	137
Table 35	ASM wiring chart	138
Table 36	Extension comparison chart	140

Installation and Maintenance Guide