Nortel Networks manual Attaching the mounting brackets to the BCM1000

74 Chapter 5 Installing the BCM1000

Figure 30 Attaching the mounting brackets to the BCM1000

Rack mount brackets

Wall mount brackets

3Install the 2 cm (3/4 in.) plywood backboard on the wall.

4Insert two #10 x 2.5 cm (#10 x 1 in.) round-head wood screws in the backboard. The screws must be 34.5 cm (13.5 in.) apart and level.

Do not tighten the screws heads against the backboard. Leave approximately 0.5 cm (0.25 in.) of the screw out of the backboard.

Note: Position the screws to leave enough space beside the BCM1000 (23 cm or 9 in.) to insert and remove the media bay modules.

5Hang the base unit on the two screws, using the outer slotted holes.

Make sure the base unit is level, the mounting brackets are against the wall, and the front cover is facing left or right. Refer to Figure 31.

P0609324 01