Nortel Networks BCM1000 manual Telephones and adapters, Not shown

48 Chapter 2 Telephony hardware

Telephones and adapters

The following telephones and devices can be used with the Business Communications Manager system.

Business Series Terminals

7100 — one-line	Business Series
display, one	Terminal 7208 —
memory button	one-line display, eight
without indicator.	memory buttons with
7000 (not shown)	indicators
(International only)
— four memory
buttons, no display
or indicators.
7316 — two-line
display, three
display buttons,
16 memory
buttons with
indicators, eight
memory buttons
without indicators.

7316E — two-line display, three display buttons, 16 memory buttons with indicators, eight memory buttons without indicators.

This telephone performs as a T7316 telephone on systems prior to BCM 3.5. On systems running BCM 3.5 and newer software, the button numbering changes, the mute button under the dial pad is active, and the telephone can support one or more Key Indicator Modules (KIMs) to create a Central Answer Position (CAP).

7316E+KIM (Key Indicator Module) — Each KIM has 24 programmable buttons with displays. On an Ordinary Kim (OKIM), the buttons can be programmed as memory buttons, with internal and external autodial numbers and feature codes. If the T7316E is configured in the system as an enhanced CAP (eCAP), the KIM becomes an enhanced KIM (eKIM) and can support line assignments, multiples of the same target line, and hunt group designators, as well as memory key functions.

P0609324 01