Nortel Networks BCM1000 manual Profile screen

Chapter 16 Replacing the hard disk 181

bNext you need to ensure the correct MSC configuration has been entered.

Enter 1 (Select the hardware profile for this unit). The screen shown in Figure 85 appears.

Figure 85 Profile screen

=============================================================================

Nortel NetworksBusiness Communications Manager

=============================================================================

							Default
							MSC
		Slot 1		Slot 2	Slot 3	Slot 4	Image
		=============================================
**	1. -BCM-WVMN-CONFIG		WAN	V.90	MSC	NIC	ETQ
	2.	-BCM=NVMN-CONFIG	NIC	V.90	MSC	NIC	ETQ
	3.	=BCM-INMN-CONFIG	IWAN	NIC	MSC	NIC	E1
	4.	-BCM-N_MN-CONFIG	NIC		MSC	NIC	E1
*	5.	-Base Platform	n/a	n/a	MSC	NIC	n/a

6.Select an alternate MSC image to load. M. Return to the Main Menu.

BCM Rls ID 2.5 RC 10

Version 7.1.8

Hardware Profile 2 CORE UPLOAD

Notes:

**Indicates the hardware profile detected on this system.

*Indicates the hardware profile configured on this system. PRESS a NUMBER (1, 2, 3, 4, 5, 6, M) ?

cThe current MSC configuration is indicated with two asterisks (**) Note the Image column.

If you want to change this, select 6 (Select an alternate MSC image to load). The system checks to see if a core upload is required. This takes about 45 minutes.

If you do not want to change the MSC load, enter the number of the selection with the asterisks.

Note: You can only change the profile once. After the profile is changed, the menu options for the profile no longer display.

4The system automatically reboots as part of the initialization process. When the process is complete, the telnet session disconnects.

5Do one of the following:

•Run the Quick Start Wizard to create the system parameters and defaults. Then restore your system data from your backup disk.

•Restore system and data information from your backup disk.

Note: The detailed processes for performing steps 4 and 5 are contained in the Business Communications Manager Programming Operations Guide.

6Test your system for correct operations.

Installation and Maintenance Guide