176Chapter 16 Replacing the hard disk

5Lift the bracketed hard disk(s) out of the unit.

6Remove the screws that fasten the brackets to the hard disk. Refer to Figure 79.

Note: Mirrored disks

If you are upgrading to a mirrored system by adding a second hard drive, you can skip step 6. However, if you are replacing a primary hard drive in a mirrored disk system, you may find it easier to remove both drives from the brackets.

Figure 79 Remove the brackets from the hard disk

Single-disk

bracket

Double disk bracket

Note: If you are returning the hard disk to a Nortel Networks repair facility, package it carefully in the replacement hard disk box. If you do not have the original box, package the drive in another box with shock absorbing material.

P0609324 01

Page 202
Image 202
Nortel Networks BCM1000 manual Remove the brackets from the hard disk