VIEW
PRGM until you are at the point where you
stopped programming. Then you may continue to enter your programs normally. If you want to stop programming at any time, simply press
RUN |
| |
PRGM to resume program operation. | ||
1. | Press | SYSTEM |
2. | Press | PRGMVIEW once. 5 DAY (indicating week- |
day program), and MOR, representing the morning heating period, will appear in the display. Also displayed are the currently programmed start time for the MOR period and the currently programmed tempera- ture.
EXAMPLE:
5 DAY
This display window shows that for the weekday MOR period, the start time is 5:00 AM, and 70° is the programmed tempera- ture (this example reflects factory prepro- gramming).
3.To change the displayed start time to your selected start time for weekday MOR heat
TIMETIME
program, press FWD or BACK until your
selected time appears. The time will change in 15 minute increments.
4.Press 
or 
until you reach your selected weekday MOR heating tempera- ture.
5.If you want the fan to run continuously
during this period, press | FAN | until PRG |
ON – AUTO |
FAN is displayed.
26
