b.What temperature should the house be at this time? These will be your DAY temperature settings.
7a. What time does the first person arrive home in the evening?
b.What temperature should the house be at this time? These will be your EVE (evening) temperature settings.
8a. What time does the last person go to bed at night?
b.What temperature should the house be at this time? These will be your NHT (night) tempera- ture settings.
Now look at the factory preprogrammed times and temperatures shown at right. If this program will
suit your needs, simply press PRGMRUN to begin run-
ning the factory preset program.
If you want to change the preprogrammed times
Heating Program for | Cooling Program for | ||||
ALL days of the Week: | ALL Days of the Week: | ||||
PERIOD | TIME | TEMP | PERIOD | TIME | TEMP |
1 | 5:00 AM | 70 | 1 | 5:00 AM | 78 |
2 | 9:00 AM | 70 | 2 | 9:00 AM | 82 |
3 | 4:00 PM | 70 | 3 | 4:00 PM | 78 |
4 | 10:00 PM | 64 | 4 | 10:00 PM | 78 |
|
|
|
|
|
|
and temperatures, follow these steps.
1.Determine the heating and cooling tempera- tures you want to use. You may select up to four heating temperatures (HEAT A, HEAT B, HEAT C, and HEAT D), and up to four cooling tem- peratures (COOL A, COOL B, COOL C, and COOL D). Use the table on the following page to write down the temperatures you have se- lected.
NOTE
To operate properly in the AUTO mode, there must be a minimum 1°F separation between the high-
20
