SET
3. Press CLOCK once. The display window will
show the hour only.
EXAMPLE:
4.Press and hold either TIMEFWD or BACKTIME until you
reach the correct hour and AM/PM designa- tion (AM begins at midnight; PM begins at noon).
SET
5. Press CLOCK once. The display will show the
day of the week as an abbreviation (MON for Monday, TUE for Tuesday, etc.).
6. Press and hold either TIMEFWD or BACKTIME until you
reach the current day of the week.
7. Press PRGMRUN once. The display will show the
correct time and room temperature alternately.
Select Heating and Cooling Temperatures
During programming, if you don’t press any but- tons for 5 minutes, the thermostat will enter the HOLD mode and will maintain a constant tempera- ture. The display will revert to the alternating time/ temperature display. To resume programming
after this happens, press PRGMVIEW until you are at the
point where you stopped programming. Then you may continue to enter your programs normally. If you want to stop programming at any time, simply
press PRGMRUN to resume program operation.
1. | Press | SYSTEM | until HEAT is displayed. |
SWITCH | |||
2. | Press | TEMPVIEW once. The display will continue to | |
show HEAT. Below HEAT is the letter A, representing the first programmed heating
25
