GE 82-POE PoE PSU Status, PoE Temperature Unit, Power limit mode, Power Allocation, PoE Function

Chapter 4: Web-Based Management

This page includes the following fields:

OBJECT	DESCRIPTION
PoE PSU Status	PoE PSU Status shows status of power supply for PoE output.
PoE Temperature Unit 1	Display the current operating temperature of PoE chip unit 1.
	The unit 1 is in charge of PoE Port-1-Port-12
PoE Temperature Unit 2	Display the current operating temperature of PoE chip unit 2.
	The unit 1 is in charge of PoE Port-13-Port-24

Over Temperature Protection

Enable / Disable over temperature protection.

When the PoE temperature unit 1 / unit2 over 70 degree C then PoE power budget will be changed by 3 segments as following.

Over 70 Degree C power budget 180 Watts Over 73 Degree C power budget 170 Watts Over 76 Degree C power budget 160 Watts

Power limit mode	Allow you to configure the power limit mode of Web Smart Device. You
	can choose :
	Port Priority Deliver PoE power by port priority setting
	Total Limit. Set limit value of the total POE port provided power to the
	PDs.
Power Allocation	Show the total watts usage of PoE Switch.
PoE Function	Can enable or disable the PoE function.
Priority	Set port priority for the POE power management
	It can choose the “port priority”, value is :
	Critical
	High
	Low
	High priority is “Critical”.
Device class	Class 0 is the default for PDs. However, to improve power management
	at the PSE, the PD may opt to provide a signature for Class 1 to 3.
	The PD is classified based on power. The classification of the PD is the
	maximum power that the PD will draw across all input voltages and
	operational modes. A PD shall return Class 0 to 3 in accordance with
	the maximum power draw as specified by Table 4.1.
Current(mA)	It shows the PoE device current Amp.
Consumption [W]	It shows the PoE device current watt.

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 133