Chapter 4: Web-Based Management

Figure 41: Port Control interface

This page includes the following fields:

OBJECT

DESCRIPTION

 

 

Port

Use the scroll bar and click on the port number to choose the port to be

configured.

 

 

 

State

Current port state. The port can be set to disable or enable mode. If the

port state is set as 'Disable', it will not receive or transmit any packet.

 

 

 

 

Auto and Force. Being set as Auto, the speed and duplex mode are

Negotiation

negotiated automatically. When you set it as Force, you have to set the

 

speed and duplex mode manually.

 

 

Speed

It is available for selecting when the Negotiation column is set as Force.

When the Negotiation column is set as Auto, this column is read-only.

 

 

 

Duplex

It is available for selecting when the Negotiation column is set as Force.

When the Negotiation column is set as Auto, this column is read-only.

 

 

 

 

Whether or not the receiving node sends feedback to the sending node

 

is determined by this item. When enabled, once the device exceeds the

Flow Control

input data rate of another device, the receiving device will send a

PAUSE frame which halts the transmission of the sender for a specified

 

 

period of time. When disabled, the receiving device will drop the packet

 

if too much to process.

 

 

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual

57

Page 61
Image 61
GE 82-POE, GE-DS-82 user manual Port Control interface