GE 82-POE, GE-DS-82 Show spanning-tree port Description, Spanning-tree debug Description

Chapter 6: Command Line Interface

Description:

Set spanning tree port priority.

Syntax:

spanning-tree port priority <0-240> [<port-list>] Parameters:

<0-240> specifies the port priority. The value must be in steps of 16. <port-list> specifies the ports to be set. Null means all ports.

show spanning-tree Description:

Show spanning-tree information.

show spanning-tree port Description:

Show spanning tree per port information.

Syntax:

show spanning-tree port [<port-list>] Parameters:

<port-list> specifies the port to be shown. Null means all ports.

The remaining commands in this section are only for system with RSTP (rapid spanning tree, 802.1w) capability:

spanning-tree debug Description:

Enable or disable spanning tree debugging information.

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 181