Chapter 6: Command Line Interface

lacp system-priority Description:

Set LACP system priority.

Syntax:

lacp system-priority <1..65535>

Parameters:

<1..65535> specifies the LACP system priority.

no lacp system-priority Description:

Set LACP system priority to the default value 32768.

show lacp status Description:

Show LACP enable/disable status and system priority.

show lacp Description:

Show LACP information.

Switch(config)# show lacp status

LACP is enabled.

LACP system priority: 32768

show lacp agg Description:

Show LACP aggregator information.

Syntax:

show lacp agg <trunk-id> Parameters:

<trunk-id>specifies the trunk group to be shown.

154

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual

Page 158
Image 158
GE GE-DS-82, 82-POE user manual Syntax Lacp system-priority Parameters