GE 82-POE How to Use this Manual, Product Features, Power over Ethernet of GE-DS-82-PoE

Chapter 1: Introduction

Power over Ethernet of GE-DS-82-PoE

The PoE in-line power following the standard IEEE 802.3af makes the GE-DS-82-PoE able to power 8 PoE devices at a distance of up to 100 meters through the 4-pair Cat 5/5e UTP wire.

How to Use this Manual

This User Manual is structured as follows:

Section	Section Content
INTRODUCTION	Product description with features and specifications
INSTALLATION	Explains the functions of the Managed Switch, and how to physically
	install it
SWITCH MANAGEMENT	Contains information about the software operation of the Managed
	Switch
WEB-BASED MANAGEMENT	Explains how to manage the Managed Switch by Web interface
CONSOLE MANAGEMENT	Describes how to use the Console Management Interface
COMMAND LINE	Explains how to manage the Managed Switch by Command Line
INTERFACE	Interface
SWITCH OPERATION	Explains how to operate the Managed Switch
POWER OVER ETHERNET	Introduces the IEEE 802.3af PoE standard and PoE provision of the
OVERVIEW	Managed Switch.
TROUBLESHOOTING	Explains how to troubleshoot the Managed Switch
APPENDIX A	Contains cable information for the Managed Switch

Product Features

Physical Port

GE-DS-82

•8-Port 10/100Base-TX RJ-45 interfaces

•2 10/100/1000T TP combo interfaces

•2 mini-GBIC/SFPslots, shared with Port-9 and Port-10

•Reset button for system management

•1 RS-232 male DB9 console interface for basic Switch management and setup

4 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual