GE GE-DS-82, 82-POE user manual Lldp Per Port Configuration, Lldp Status

Chapter 4: Web-Based Management

Figure 95: LLDP Per Port Configuration

This page includes the following fields:

OBJECT	DESCRIPTION
LLDP Status	Enable/Disable LLDP.
LLDP hello time	You can change LLDP hello time value. The time interval between the
	transmission LLDP info packets. Value range is from 5 to 32768. Default
	value is 30.
LLDP hold time	You can change LLDP hold time value. (The hold time * the hello time) is
	the TTL time in the LLDP info packets. Value range is from 2 to 10. Default
	value is 4.
Port Status	You can change LLDP port status to Tx_only/Rx_only/Tx_and_Rx/Disable.
	Tx_only: LLDP transmit the packet of the port only. Rx_only: LLDP receive
	the packet of the port only. Tx_and_Rx: LLDP transmit and receive the
	packets of the port. Disable: LLDP do not transmit and receive the
	packets of the port.

138 GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual