Chapter 6: Command Line Interface

priority packets sent before one lower priority packet is sent. For example, 8 Highest:4 second-high means that the switch sends 8 highest-priority packets before sending 4 second-high priority packets.

QoS level: 0-7 priority level can map to highest, second-high, second-low, lowest queue.

qos priority Description:

Set 802.1p priority.

Syntax:

qos priority <first-come-first-service all-high-before-low weighted-round-robin> Parameters:

[<highest-weight>][<sechighweight>][<sec low -weight>] [<lowest-weight>] e.g. qos priority weighted-round-robin 8,4,2,1.

qos level Description:

Set priority levels to highest, second-high, second-low and lowest.

Syntax:

qos level < highest second-high second-low lowest > <level-list>

Parameters:

<level-list> specifies the priority levels to be high or low. Level must be

between 1 and 7.

e.g. qos level highest 7 e.g. qos level lowest 4

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual

175

Page 179
Image 179
GE 82-POE, GE-DS-82 user manual Set 802.1p priority