Chapter 4: Web-Based Management

This page includes the following fields:

OBJECT

DESCRIPTION

 

 

Active

The port automatically sends LACP protocol packets.

 

 

 

The port does not automatically send LACP protocol packets, and

Passive

responds only if it receives LACP protocol packets from the opposite

 

device.

 

 

NOTE: A link having two passive LACP nodes will not perform dynamic LACP trunk because both ports are waiting for an LACP protocol packet from the opposite device.

Forwarding and Filtering

The frames of Ethernet Packets contain a MAC address (SMAC address), which shows the MAC address of the equipment sending the frame. The SMAC address is used by the switch to automatically update the MAC table with these dynamic MAC addresses. Dynamic entries are removed from the MAC table if no frames with the corresponding SMAC address have been seen after a configurable age time.

Dynamic MAC Table

Entries in the MAC Table are shown on this page. The Dynamic MAC Table contains up to 8192 entries, and is sorted first by VLAN ID, then by MAC address. You can view all of the dynamic MAC addresses learned by the listed port.

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual

101

Page 105
Image 105
GE 82-POE, GE-DS-82 user manual Forwarding and Filtering, Dynamic MAC Table