Chapter 6: Command Line Interface

MAC limit

MAC limit allows users to set a maximum number of MAC addresses to be stored in the MAC address table. The MAC addresses chosen to be stored in MAC address table is the result of first-come-first-save policy. Once a MAC address is stored in the MAC address table, it stays in until it is aged out. When an “opening” is available, the switch stored the first new MAC address it sees in that opening. All packets from MAC addresses not in the MAC address table should be blocked.

User can configure the MAC limit setting and fill in the new value.

mac-limit Description:

Enable MAC limit.

no mac-limit Description:

Disable MAC limit.

Mac-limit

Description:

Set port MAC limit value, 0 to turn off MAC limit of port.

Syntax:

Mac-limit <port-list> <1-64>

show mac-limit Description:

Show MAC limit information, including MAC limit enable/disable, per-port MAC limit setting.

172

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual

Page 176
Image 176
GE GE-DS-82, 82-POE user manual No mac-limit Description, Mac-limit Description, Syntax Mac-limit port-list