Chapter 6: Command Line Interface

vlan mode Description:

Change VLAN mode.

Syntax:

vlan mode (disabledport-baseddot1q) Parameters:

(disabled port-based dot1q) specifies the VLAN mode.

NOTE: Change the VLAN mode for every time, user have to restart the switch for valid value.

Advanced 802.1Q VLAN Configuration

Ingress filters configuration

When a packet was received on a port, you can govern the switch to drop it or not if it is an untagged packet. Furthermore, if the received packet is tagged but not belonging to the same VALN group of the receiving port, you can also control the switch to forward or drop the packet. The example below configures the switch to drop the packets not belonging to the same VLAN group and forward the packets not containing VLAN tags.

show vlan mode Description:

Display the current VLAN mode.

vlan mode Description:

Change VLAN mode.

Syntax:

vlan mode (disabledport-baseddot1q) Parameters:

(disabled port-based dot1q) specifies the VLAN mode.

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual

157

Page 161
Image 161
GE 82-POE Advanced 802.1Q Vlan Configuration, Change Vlan mode, Disabled port-based dot1q specifies the Vlan mode