White Rodgers SuperStat Pro Programmable Thermostat manual Programming Heating and Cooling

Programming Heating and Cooling

Quick Guide Step Description Thermostat Display

Press until time is flashing.

Press to set time at which selected period will begin.

	Press the TIME/SET button once until time flashes in the
	display. Use the arrow buttons to set the time at which you
	want the selected time period of the day to begin. The	Time will flash:
	arrow buttons change the time in 15 minute intervals.
	Note: PM displays to the right of the time to indicate PM.
	If PM does not appear next to the time, it is AM.
5	You set only the start time for each time period. Each
	period ends automatically at the beginning of the next time

period. The time periods (MOR, DAY, EVE, and NHT) must follow each other in order. For example, if you set MOR to begin at 6:30 AM, then DAY must begin after 6:30 AM.

To skip a period, just program the start time and setpoint to match the previous period.

20 SuperStat Pro User Guide