Configuration
step 1. For configuration, select the Outdoor AP on the Hosts View window.
step 2.
step 3. Click Config to go to the configuration window (Figure 12).
Figure 12. Config window — IP panel
Config Window – IP Panel
IP Address Setting: The Outdoor AP is a DHCP client. It will automatically ask the DHCP server to assign it an IP address. An administrator can assign a fixed IP to an Outdoor AP by unchecking the Obtain IP Settings Automatically (by DHCP) box (Figure 12). You may also configure a subnet mask and add a default gateway.
If you assign a fixed IP address to an Outdoor AP, make sure that all Outdoor APs within the same network have the same TCP/IP subnet address.
| Obtain IP Settings | Automatically retrieves an IP address for the Outdoor AP | |
| Automatically (by | from a Dynamic Host Configuration Protocol (DHCP) | |
| DHCP) | server. This option is enabled by default. | |
| IP Address | Manually assigns an IP address to the Outdoor AP. | |
|
| ||
22 | Outdoor Access Point |
| |
