WHP Wireless WHP-1100, WHP-1120, WHP-1130 user manual Config Window - SNMP Access Control Panel

WEP-encrypted)

•WEP: Enable, Authentication: Shared – Enable data encryption and use Shared Key authentication (such requests must be WEP-encrypted)

•WEP: Enable, Authentication: Both – Enable data encryption and use both Open System and Shared Key authentication (all requests are processed)

If enabled data encryption, there are two options in the pull-down Key Length box:

•64-Bit - Enable use of 64-bit WEP

•128-Bit - Enable use of 128-bit WEP

Key Generation - There are two ways to generate a security key. The first is by entering any text in the Passphrase field. Click the Generate button. For 64-bit WEP, it will generate four keys, Key 1, Key 2, Key 3, and Key 4. Select a key number from the dropdown list of the Default Key box. If you do not manually select a key, key 1 will be selected. For 128-bit WEP, only one key will be generated. Click OK.

Another WEP key generation method is to insert the key values directly from the keyboard. Enter your own key into one of the Key 1~4 fields. Select that field number in the Default Key field.

Config Window – SNMP Access Control Panel

The AP contains an SNMP access table to limit access to its configurations. By default there is no restriction on accessing the AP. To avoid chaos on the network, access to the Outdoor AP configuration should be restricted to only those who require access.

When you select SNMP Access Control, the system will display four blank wireless devices for setting (maximum of 4 SNMP devices can be set). Right-click on a blank in the list and click Edit Address (Figure 17).

28 Outdoor Access Point