RAD Data comm IPmux-16 Viewing Configuration Summary, To set the IP ToS Type of Service

IPmux-16Installation and Operation Manual Chapter 3 Operation

Main Menu

↓

2. Configuration

↓

2.System Configuration

↓

1.IP ToS

IP ToS

➤To set the IP ToS (Type of Service):

• Type 4 (IP ToS) in the VLAN & IP Support menu.

Your setting will set the IP ToS field in the IP frames transmitted by the device.

•Enter the IP ToS (Type of Service) to be assigned to this channel, 0-255. Default configuration: 0

ToS configuration configures the WHOLE byte.

IPmux-16 allows you to configure the WHOLE ToS byte field, since different vendors may use different bits to tag packets for traffic prioritization. The user can also configure VLAN priority bits for Level 2 Priority.

ToS assignment applies to all TDM packets leaving IPmux-16.

Viewing Configuration Summary

Main Menu	➤ To view Configuration Summary:
↓
2. Configuration	•	Type 2 (Configuration) in the Main menu.
↓
6. Configuration	•	Type 6 (Configuration Summary) in the Configuration menu.
Summary
	The Configuration Summary screen allows you to view summary information of all
	existing bundle connections (Figure 3-34).
						CONFIGURATION SUMMARY
	Bund		Dst	Dst IP/Next Hop				TDM/Jitter Assigned TS			Usage
	+----	+	-----	+-----------------				+------	+---------------	+	----+
	1		1	192.168.100.2				48	1, 2, 3,4, 5,
										1.95
				0	.0	.0	.0	300 CAS + CRC			%
	+----	+	-----	+-----------------				+------	+---------------	+	-----+
	2		2	192.168.100.3				48	10,11,12
									13,14,15	2.34
				0	.0	.0	.0	300 CAS + CRC			%
	+----	+	-----	+-----------------				+------	+---------------	+	-----+
	Press		ESC	to exit.

Figure 3-34. Configuration Summary Screen

Configuring IPmux-16 3-37