Chapter 3 Operation | |
|
|
Main Menu
↓
2.Configuration
↓
2.Physical Layer
Configuration
↓
3 or 4. E1/T1 Physical Layer Configuration
| E1/T1 PHYSICAL LAYER CONFIGURATION |
|
1. | Channel #1 | > |
2. | Channel #2 | > |
3. | Channel #3 | > |
4. | Channel #4 | > |
5. | Channel #5 | > |
6. | Channel #6 | > |
7. | Channel #7 | > |
8. | Channel #8 | > |
ESC. Exit
Current Slot is | 3 |
Figure 3-28. E1/T1 Physical Layer Configuration Menu
Once you choose a channel number, the E1 or T1 Physical Layer Configuration menu appears.
E1 Physical Layer Configuration
Type 1 (Physical Layer Configuration) in the E1/T1 Configuration menu to configure the E1 physical layer.
|
| PHYSICAL LAYER CONFIGURATION | |
1. | Transmit Clock Source | Adaptive | |
2. | Loopback State | Disable | |
3. | Rx. Sensitivity | ||
4. | Line Type |
| CRC4 enable |
5. | Idle Code |
| 7E |
6. | Signaling | Mode | CAS enable |
7. | Cond. Data pattern | FF | |
8. | Cond. CAS | (ABCD)pattern | 01 |
ESC. Exit
Current Slot/Channel is 3/1
