WHP Wireless WHP-1130, WHP-1120, WHP-1100 user manual Config Window - MAC Access Control Panel

Config Window – MAC Access Control Panel

This feature lets you limit access to the network through the access point. You can list up to 1000 stations that are to be granted or denied access. A drop-down box lets you select the method of access control:

•Disabled: Disable MAC-address access control. This is the default setting.

•Accepted List: Only wireless stations whose MAC addresses are on the list are allowed to connect through the access point.

•Denied List: Wireless stations whose MAC addresses are on the list are prevented from connecting through the access point.

To add a wireless station to the list, click the New MAC Address icon (a sheet of paper with one corner folded) on the left side of the MAC Access Control panel. You will be prompted to enter:

•The wireless station’s MAC address.

•A name for the station.

Figure 15. Config window — Mac Access Control panel

Wireless stations registered in the MAC Address Control Table can be individually turned on or off. For example, if you have enabled the Accepted List option, you can check the Not Use box for any listed station; the status of this station’s entry will be

26 Outdoor Access Point