Unpacking
Open container and check for shipping damage. Report any damage immediately to your distributor and shipping agent. Do not discard any shipping material until the Planer is assembled and running properly.
Compare the contents of your container with the following list to make sure all parts are intact. Report any missing parts to your distributor. Read this owner’s manual thoroughly for assembly, maintenance and safety instructions.
Crate Contents (Figure 2):
1Planer (not shown)
1Dust hood
2Cast iron extension tables
1Handwheel
1Handle
4Hex wrenches (3, 4, 5 and 6mm)*
2
3Bags of fasteners* – see below
1Owner’s manual (not shown)
1Warranty card (not shown)
Model 15S only:
1
2Adjustment pins*
Model 15HH ONLY (Figure 4):
1 1/4” Drive Screwdriver
1T25 Torx Drive Socket Adaptor
1Set of 10 Knife Inserts
Contents of fastener bags* (Figure 3):
A – (for installing handwheel) 1 Direction label
1 Hex nut
1 Flat washer
1 Key
B – (for installing extension tables) 6 Hex cap screws, M8x25
6 Socket set screws, M8x20
C – (for installing dust hood)
3 Socket head cap screws, M6x12
3 Lock washers, M6
3 Hex cap screws, M5x10
3 Flat washers, M5
*indicates parts included in hardware kit
7
Figure 2
Figure 3
Figure 4
