Introduction
This manual includes operating and maintenance instructions for the Wilton Model 2221VS, 2223VS, 2232AC and 2234AC Variable Speed Drill Presses. This manual also includes parts listings and illustra- tions of replaceable parts.
Wilton Model 2221VS and 2223VS drill presses feature manual speed control. Models 2232AC and 2234AC have inverter speed control. This manual contains procedures for both speed control versions. The manual provides separate instructions when differences in operation and maintenance exist.
Refer to Figures 1 and 2 for key features of the drill press.
Control | Electrical | |
Panel | Enclosure | |
| (hidden, far | |
| side) | |
| Drill | |
| Head | |
Speed | Head | |
Clamping | ||
Adjustment | ||
Nuts (2) | ||
Handwheel | ||
| ||
Switch | Drive | |
Depth | Motor | |
Indicator | Spindle | |
Spindle | ||
Handle | ||
| ||
| Column |
Operation and Set-up
Securing the Base
The base of the drill press has four mounting slots; two slots on both sides of the base. The drill press should be level and rest solidly on the floor. Place shims under the four mounting slots in the base as needed to level the drill press.
When securing the base to the floor, apply even torque to the fasteners to prevent distortion of the base.
Drive
Motor
Control Panel
Speed
Shift Lever
Head
Clamping
DepthNuts (2)
Indicator
Electrical
Enclosure
Spindle
Column
Work |
Table |
Base |
Mounting
Slots (4)
Figure 1: Drill Press Features
(Manual Speed Control Model)
Spindle
Handle
Work
Table
Base
Mounting
Slots (4)
Figure 2: Drill Press Features
(Inverter Speed Control Model)
7
