Accessories
Belt Grinder Pedestal
The optional pedestal enables the Square Wheel Belt Grinder to be mounted in a free standing configuration rather than on a work bench. The grinder is secured to the pedestal using the four holes in the base of the grinder (refer to page 22).
Dust Collection Systems
A dust collection system is available as an option (refer to page 24 for additional coverage).
The dust collection system can be used in two con- figurations: as a machine base (Figure 9) or as a stand- alone system (Figure 8).
In the
Another option is to use the dust collection system as a base for the Model 4103 grinding machine in lieu of placing the machine on a bench or on the pedestal.
The second inlet duct on the side of the system is available for connecting another grinding machine. In areas with limited space, this may be the most desir- able option.
The dust collection system features a chip drawer into which grinding debris is collected. The dust collection system has a filter at the rear to filter out remaining grinding debris.
The system has a removable top that provides access for cleaning and maintenance. The system is con- trolled by an ON/OFF toggle switch on the motor at the rear of the machine.
Figure 8: Stand-Alone Dust Collection System
17
