WindChaser Products PACR12 instruction manual Continuous Drain Feature, Drain A, Drain B

CONTINUOUS DRAIN FEATURE

There are two continuous drain features in this unit.

1.Drain (A) runs through the exhaust hose and offers continuous drainage via a built-in pump. When the cap is on Drain (B) and the condensation tank fills to capacity, Drain (A)’s pump will automatically turn on and pump the condensation out of the unit. If the exhaust hose is installed more than 5.9 feet above the ground,

Drain (A)’s pump will not work and the condensation must then be drained from Drain (B).

2.Drain (B) is located at the bottom of the rear of the unit and offers continuous drainage via gravity. To use Drain (B), place a shallow pan underneath the drain outlet and remove the rubber cap. In order to avoid spilling water while moving the unit from room to room, please drain the condensation via Drain (B) before moving the unit. In addition, whenever you will not be using the unit for a extended period of time, such as at the end of the season, use Drain (B) to make sure the condensation is completely drained from the unit.

MAX

DRAIN (A)

DRAIN (B)

5