Equipment Set- Up:
1.Connect hoses to dome.
2.Loop power cord
through strain relief as shown.
3.Become familiar with the machine.
CONTROLS
Before operating the ADP become familiar with the controls located at the back of the machine and on the control panel.
\J
\
D E
A Bush Switch | G Handle Lock Lever |
B Continuous Pump | H Accessory Tool |
Switch | Solution Connection |
C Vacuum Switch | I Brush Adjustment |
D Brush Motor | Lever |
Circuit Breaker | J Solution Valve |
E Intermittent Pump | K Solution Drain Hose |
Switch | L Recovery Drain Hose |
F Vacuum Motor |
|
Circuit Breaker |
|
4 | 98198 | 7/l/97 |