Winegard MV-0055 manual Introduction/How Does Digital Satellite TV Work?

Introduction/How Does Digital Satellite TV Work?

Introduction

Congratulations! You have purchased one of Winegard’s latest developments in the mobile satel- lite reception product line —the Movin’ ViewTM. This system, used with your digital satellite receiver, will deliver the best reception possible using GPS (Global Positioning System) and precision gyro- scopes.

How Does Digital Satellite

TV Work?

Satellite programming originates from an “uplink” facility on Earth — the facility receives many sig- nals from different sources, combines the signals digitally and transmits to the satellites. The satellites (22,300 miles above Earth) receive the uplink signal, amplify it and then transmit it back to

earth in the Ku frequency band.

This signal is concentrated and reflected to the LNBF* located

at the “focal point” of the dish. The LNBF amplifies and converts

the signal to the 950 to 2050 MHz range. The signal is then passed through a coaxial cable to the receiver where individual channel selection

*Low Noise Block Converter Feed

UPLINK SIGNAL

PROGRAMMING UPLINK

CONTROL CENTERS

and processing take place.

For Programming information call:

DISH NETWORKTM - 1-800-333-DISH (1-800-333-3474) DIRECTV® - 1-800-DIRECTV (1-800-347-3288)

Your new Winegard RV Digital Satellite System is an easy-to-use satellite TV reception system. Because it mounts on the top of your recreational vehicle, it goes where you go and provides quality reception of digital satellite signal in the continental United States only.

DIGITAL BROADCAST SYSTEM

SATELLITE(S)

HIGH POWER KU-BAND

DOWNLINK SIGNAL

WINEGARD DIGITAL SATELLITE

SYSTEM ANTENNA

TELEVISION

SET

RECEIVER

DIRECTV® is an official trademark of DIRECTV, a unit of GM Hughes Electronics Corporation. DISH NetworkTM is an official trademark of EchoStar Communications Corporaton.

2