Operation

1.Turn on receiver and television set. The MV-4002 must be connected to a receiver that is plugged into 120 VAC.

2.Verify that you are getting the receiver’s menu screens on the television. These screens are avail- able with or without the dish finding the signal.

3.Turn the power switch on for the MV-4002.

The dish should start moving, making one or two revolutions before it stops to acquire GPS. This can take a few moments or up to 10 minutes. Normal operation will be less than a minute.

4.Once the unit has acquired GPS, the dish will begin its search.

a. The dish will pause on the signal long enough to determine which satellite it has found.

b. If it moves off the signal , it is in an effort to verify the signal and it should return to the signal shortly.

5.After the unit has verified that it has the correct satellite, it will continue to fine tune for about 6 min- utes (unless the vehicle is in-motion, see 7 below).

6.At the end of 6 minutes the unit will move to check it’s alternate satellite then move back to the primary and go to sleep. See page 3 for a description of Sleep Mode.

7.While the vehicle is in motion, the unit will not en- ter sleep mode after a successful search. Instead it will wait until the unit has stopped moving for 6 min- utes before entering sleep mode.

8.If you do not have signal, see Troubleshooting, p. 11.

Recovery from Signal Interruption—

While traveling, the signal will be interrupted when the line of sight to the satellite is blocked. Signal is acquired again after line of sight is restored. If signal is interrupted for more than 15 seconds, the system automatically enters the search routine. The length of time for the TV picture to recover de- pends on the receiver model you are using.

The unit must travel in straight line for 10 seconds when starting to operate in motion.

4

Page 3 Page 5
Page 4
Image 4
Winegard manual Operation, Turn the power switch on for the MV-4002, If you do not have signal, see Troubleshooting, p
Page 3 Page 5

MV-4002 specifications

The Winegard MV-4002 is a versatile and highly efficient over-the-air antenna specifically designed for RVs, boats, and other mobile applications. This antenna stands out due to its compact design and high-performance capabilities, making it a popular choice among travelers seeking reliable television reception wherever they go.

One of the main features of the Winegard MV-4002 is its ability to receive both VHF and UHF signals seamlessly. This dual-band capability ensures that users can access a wide range of channels, providing a broader selection of programming without needing multiple antennas. The MV-4002 is engineered to be omnidirectional, meaning it can pick up signals from all directions. This is particularly advantageous for users on the move, as it eliminates the need to constantly adjust the antenna to find the best signal.

The MV-4002 also incorporates advanced technology to enhance signal quality and reception. With its built-in low noise amplifier (LNA), it boosts weak signals, allowing users to enjoy clearer audio and video quality. This feature is especially important in rural areas or locations with challenging terrain, where signals can be difficult to acquire. The antenna is designed to operate over a wide frequency range, ensuring compatibility with various broadcasting standards.

In terms of design, the Winegard MV-4002 is both lightweight and compact, making it ideal for space-constrained environments such as RVs and boats. Its sturdy construction ensures durability against harsh weather conditions, providing peace of mind for outdoor enthusiasts. The antenna is also easy to install, often requiring minimal tools and effort, which enhances its appeal to users who prefer a hassle-free setup.

Another significant characteristic of the MV-4002 is its portability. Weighing just a few pounds, this antenna can be easily mounted and dismounted as needed. Its sleek finish and low profile minimize wind resistance, further enhancing its suitability for mobile applications.

In summary, the Winegard MV-4002 is a high-performing mobile antenna that combines efficient signal reception with ease of use and portability. Its capability to receive VHF and UHF signals, advanced amplification technology, and robust design make it an excellent choice for anyone seeking reliable television access away from home. Whether you're parked at a campsite or cruising along the coast, the MV-4002 ensures that entertainment is always within reach.
Top Page Image Contents