Tuning Antenna

STEP 1. Your receiver should indicate it is receiving a signal. To tune your antenna for the best signal strength. SLOWLY move the antenna left, then right, until you have found the position that gives the highest signal strength. It is important to turn the antenna slowly. Because the signal is digital, the receiver takes a few seconds to lock on.

STEP 2. Place rotation clamp in the LOCK position. This prevents an tenna movement and loss of signal.

STEP 3. SLOWLY raise, then lower the antenna until you have peaked the signal. You are now ready to watch satellite TV!

Lowering Antenna to Travel Position

STEP 1. Set rotation clamp to ROTATE position.

STEP 2. Rotate antenna until pointer on directional handle aligns with the red screw on the rotation clamp.

STEP 3. Turn elevating crank counter clockwise in direction of DOWN arrow until meeting resistance. The number of turns will vary according to the elevation angle the antenna was set at.

STEP 4. Move rotation clamp to the LOCK position. Antenna is now locked in travel position.

STEP 5. Snap elevation crank in place.

CAUTION! NEVER LOWER ANTENNA IN ANY POSITION

EXCEPT TRAVEL POSITION!

DO’S

DON’T’S

1.Do check parking location for obstructions before raising antenna.

2.Do carefully raise, lower and rotate antenna. If difficult, check for cause.

3.Do rotate SLOWLY when searching for the satellite(s), and check fine tuning on TV set to make sure it is properly adjusted.

4.Do lower antenna before moving vehicle!

5.Activate programming by calling program provider for your receiver.

1.Don’t move RV/coach with the antenna in the UP position. This will VOID your WARRANTY. This may also cause damage to your roof.

2.Don’t force elevating crank up or down. Check for cause of trouble.

3.Don’t rotate directional handle hard against stops.

4.Don’t apply paint over top of base plate or any where on lift.

5.Don’t apply sealant on gear housing.

3

Page 2 Page 4
Page 3
Image 3
Winegard RM-DM46, RMDM04, RMFLDM4, RM-DM00 manual Tuning Antenna, Except Travel Position
Page 2 Page 4

RMFLDM4, RM-DM46, RMDM04, RM-DM00 specifications

Winegard is a well-known manufacturer of advanced antenna technology, and its products are designed to provide high-quality reception for broadcast television. Among its lineup, the Winegard RM-DM00, RMFLDM4, RMDM04, and RM-DM46 antennas stand out for their exceptional features and efficiency.

The Winegard RM-DM00 is a compact, multi-directional antenna that is engineered for optimal performance in urban areas with significant electronic interference. Its unique design allows it to capture over-the-air signals from multiple directions, ensuring a robust signal and exceptional picture quality. With a sleek and discreet profile, the RM-DM00 can be easily mounted on rooftops or exterior walls, offering versatility in installation options.

Next in line, the RMFLDM4 is a flat antenna known for its ultra-thin design and no-obstruction capabilities. This antenna employs advanced filtering technologies that minimize noise and enhance signal clarity. Its sleek aesthetic makes it an ideal choice for modern interiors, allowing homeowners to place it in living rooms or offices without disrupting the decor. The RMFLDM4 is engineered to pick up both VHF and UHF channels, making it a versatile choice for users in various regions.

The RMDM04 is a durable and weather-resistant model designed for outdoor usage. This antenna is perfect for those living in rural areas, where signal ranges can be challenging. Equipped with advanced amplification technology, the RMDM04 can extend the range of signal reception enough to capture long-distance broadcasts, ensuring viewers enjoy uninterrupted access to their favorite channels, even in remote locations.

Lastly, the RM-DM46 is designed for superior performance, boasting dual UHF/VHF reception capabilities. This model includes a built-in signal amplifier that boosts weak signals while reducing noise for the ultimate viewing experience. The RM-DM46 is versatile and easy to install, compatible with most devices, making it a favorite among cord-cutters who wish to access free, high-quality television content.

Overall, each of these Winegard antennas—RM-DM00, RMFLDM4, RMDM04, and RM-DM46—offers unique features and technologies designed to maximize signal reception while ensuring reliability and ease of use. Whether for urban settings or rural landscapes, Winegard's antennas effectively enhance viewers' experiences, allowing them to enjoy a diverse range of channels with excellent picture quality. With these options, users can find the perfect match for their television needs, underscoring Winegard's commitment to innovation and performance in the antenna market.
Top Page Image Contents