Winegard RMFLDM4, RMDM04, RM-DM00, RM-DM46 manual Assembly & Installation, Things you need

Models: RMFLDM4 RM-DM46 RMDM04 RM-DM00

1 19
Download 19 pages 38.97 Kb
Page 5
Image 5
Winegard Model

 

 

 

Assembly & Installation

Things you need —

 

 

Screwdrivers (Phillips and slot)

ABS glue

Non-hardening sealant

1-3/4” hole saw

Drill with 1/8” bit

(Check manufacturer’s specifications for

7/16” wrench

Tape measure

compatibility with your roof material.)

Winegard’s Digital Elevation Sensor has been

INSTALLED and CALIBRATED at the factory

STEP 1. Choose a location on the roof for dish that will allow dish to raise and rotate without interfering with other roof-mounted equipment. Make sure inside ceiling plate is easily acces- sible, and with no obstructions that would interfere with operation.

Figure 3 shows minimum distance (10”) antenna should be located from edge

of vehicle roof. It is recommended that you check with your dealer or manufacturer for provisions that may have been made in the roof for antenna mounting; a

FIGURE 3reinforced roof area or pre-wire installation from the factory.

Center Roof Line

19.50

29”

34” DIAMETER

OPERATING

AREA

17” RADIUS

MINIMUM

10”

FRONT OF VEHCILE

NOTE: The system must be level for proper operation!

RW-5000 roof wedge with gasket is available. If inside roof wedge is needed, Winegard’s RW-2000 can be trimmed to fit ceiling plate.

STEP 2. Position template on roof (see insert page of this manual). CAUTION: DO NOT drill through

wiring. Carefully drill a 1-3/4” hole through roof and ceiling of vehicle. Inspect hole to make sure wiring is intact. (Roof template, see insert.)

It is highly recommended the antenna be mounted on roof center line. Do not mount antenna closer than 10” from roof edge.

RW-5000 Roof Wedge with gasket

Vehicle Roof

 

Interior

Antenna Controls

Roof Wedge

(Optional)

NOT TO SCALE

Rev/7/9/04

5

Page 5
Image 5
Winegard RMFLDM4, RMDM04, RM-DM00, RM-DM46 manual Assembly & Installation, Things you need

RMFLDM4, RM-DM46, RMDM04, RM-DM00 specifications

Winegard is a well-known manufacturer of advanced antenna technology, and its products are designed to provide high-quality reception for broadcast television. Among its lineup, the Winegard RM-DM00, RMFLDM4, RMDM04, and RM-DM46 antennas stand out for their exceptional features and efficiency.

The Winegard RM-DM00 is a compact, multi-directional antenna that is engineered for optimal performance in urban areas with significant electronic interference. Its unique design allows it to capture over-the-air signals from multiple directions, ensuring a robust signal and exceptional picture quality. With a sleek and discreet profile, the RM-DM00 can be easily mounted on rooftops or exterior walls, offering versatility in installation options.

Next in line, the RMFLDM4 is a flat antenna known for its ultra-thin design and no-obstruction capabilities. This antenna employs advanced filtering technologies that minimize noise and enhance signal clarity. Its sleek aesthetic makes it an ideal choice for modern interiors, allowing homeowners to place it in living rooms or offices without disrupting the decor. The RMFLDM4 is engineered to pick up both VHF and UHF channels, making it a versatile choice for users in various regions.

The RMDM04 is a durable and weather-resistant model designed for outdoor usage. This antenna is perfect for those living in rural areas, where signal ranges can be challenging. Equipped with advanced amplification technology, the RMDM04 can extend the range of signal reception enough to capture long-distance broadcasts, ensuring viewers enjoy uninterrupted access to their favorite channels, even in remote locations.

Lastly, the RM-DM46 is designed for superior performance, boasting dual UHF/VHF reception capabilities. This model includes a built-in signal amplifier that boosts weak signals while reducing noise for the ultimate viewing experience. The RM-DM46 is versatile and easy to install, compatible with most devices, making it a favorite among cord-cutters who wish to access free, high-quality television content.

Overall, each of these Winegard antennas—RM-DM00, RMFLDM4, RMDM04, and RM-DM46—offers unique features and technologies designed to maximize signal reception while ensuring reliability and ease of use. Whether for urban settings or rural landscapes, Winegard's antennas effectively enhance viewers' experiences, allowing them to enjoy a diverse range of channels with excellent picture quality. With these options, users can find the perfect match for their television needs, underscoring Winegard's commitment to innovation and performance in the antenna market.