Clearance Requirements
The arm of the TRAV’LER antenna extends 32.5” from the center of the base and may operate only 8” above the surface to which the TRAV’LER antenna is mounted. To ensure you have adequate clearance for the TRAV’LER antenna to safely operate, check that there are no obstructions taller than 8” within 32.5” of the center of the base.
Also, check that there are no obstructions (such as tree limbs) above the antenna that will prevent it from raising. At its highest point, the antenna will extend to 37” above the roof to which it is mounted (see fig. 3).
FIGURE 3. Range of motion for TRAV’LER SK-1000 antenna
Parts
Mount Base with 30’ Power/Control Cable | Cable Entry Plate | Interface Box |
Interface Box
Power Supply
Mounting Screw (20)
Reflector
Reflector Nut (4)
24” AC power cord | 30’ Gray Coax Cable 30’ Black Coax Cable |
Reflector Bolt (4)
2
