Operation for Bell TV Users
1. Press and hold “POWER” for two | 2. The interface will ask if you wish |
seconds or until the TRAV’LER | to enter the user menu. Press the |
interface displays “POWER ON.” | Select button to choose “Yes,” |
Then, press and hold “ENTER for | and then press the Enter button to |
two seconds. | confirm the selection. |
3.The user menu consists of four choices: Search Mode, Diagnostics, Installation, and Exit. Press “SELECT” until the asterisk is next to “Installation,” and press “ENTER.”
| WINEGARD COMPANY |
| Enter User Menu? |
| Installation* |
| POWER ON |
| *Yes No |
| Exit |
4. The interface box will ask for a | 5. Press the Enter button to choose | 6. Press the Select button until the | |||
password. Press “ENTER” four | “Select Antenna.” | asterisk is next to “SM Mount,” | |||
times to enter code “0000.” |
|
| and then press “ENTER.” | ||
|
|
|
|
|
|
| Install Password |
| Select Antenna* |
| LG Mount |
| 0000 |
| Raise Antenna |
| SM Mount* |
7.Enter code “0022” by pressing the Select button to increase each number. Press “ENTER.”
8.Press “SELECT” until the asterisk is next to “SM ExpressVu.” Press the Enter button.
9.Press the Select button until the asterisk is next to “Yes.” Press the Enter button.
SM Password |
| SM ExpressVu* |
| SM ExpressVu |
0022 |
| Installation |
| *Yes No |
|
|
|
|
|
10.The interface will display “in progress” and then “Success.”
11.Press the Enter button. Press “SELECT” until the asterisk is next to “Installation.” Press “ENTER.”
12.Press the Select button until the asterisk is next to “Exit.” Press the Enter button.
SM ExpressVu |
| Installation* |
| Exit* |
Success |
| SM DTV Triple |
| Select Antenna |
|
|
|
|
|
13.The interface will ask if you want to turn the power off. Choose “No” by pressing the Enter button.
14.The interface will display the type of satellite dish on the top line.
15.The TRAV’LER antenna will enter the search routine as part of its normal operation.
Power Off? |
| SM ExpressVu |
| SM ExpressVu |
Yes *No |
| Ready: |
| Searching... |
16. Upon finding a satellite, the | 17. The TRAV’LER antenna will lock | ||
antenna will | onto two different satellites: 82° | ||
a signal. | and 91°. The antenna will display | ||
|
| an asterisk for each satellite found. | |
|
|
|
|
| SM ExpressVu |
| SM ExpressVu |
| Peaking... |
| *91 *82 |
TIP If you want to turn off the power to the antenna after
the antenna has locked onto satellites, press “POWER” and “SELECT” at the same time.
Before traveling, make sure to press “POWER” and wait for the antenna to start to power up; then press “POWER” again to initiate the stow sequence.
2
