Automatic Operation
The TRAV’LER interface offers a simple one button operation. The steps below show the screens that will be displayed as the TRAV’LER Automatic
Table of Contents |
|
Installation |
|
Specifications | 1 |
Safety Recommendations | 1 |
Clearance Requirements | 2 |
Parts | 2 |
Choosing a Location for the TRAV’LER Antenna | 3 |
Choosing a Location for Cables to Enter the Vehicle | 3 |
Installing the TRAV’LER Antenna | 4 |
Installing the Cable Entry Plate | 5 |
Installing the Cables | 5 |
Overall Installation | 5 |
Installing the Reflector | 6 |
Winegard Mobile Products Limited Warranty | 6 |
Operation |
|
Automatic Operation | 1 |
ManualOperation | 2 |
DIRECTV Receiver Setup | 3 |
1
WINEGARD COMPANY
POWER ON
Press and hold [POWER] for two seconds or until the TRAV’LER interface displays “POWER ON.”
3
LG DTV Slimline
Ready:
The TRAV’LER interface will try to determine the type of dish that it is working with. The TRAV’LER interface will display the type of satellite dish on the top line.
2
connecting to
antenna
Now that the power is on, release the [POWER] button.
4
LG DTV Slimline
Searching...
The TRAV’LER antenna will enter the search mode as part of its normal operation.
Ready to Travel? | 4 |
Emergency Manual Stow | 4 |
Emergency Power Off | 5 |
Other Notes | 5 |
Receivers Compatible with SWM Technology | 5 |
Troubleshooting | 6 |
5
LG DTV Slimline
Home EL
The TRAV’LER will find its home position. Then, it will begin to look for a satellite. When the TRAV’LER antenna finds a satellite, it will
6
LG DTV Slimline *101 *110 *119
In automatic search mode, the TRAV’LER antenna will lock onto three different satellites.
As the antenna finishes searching, the TRAV’LER antenna will display an asterisk for each satellite found.
TIP If you want to turn off the power to the TRAV’LER antenna after the antenna has locked onto satellites, press [POWER] and [SELECT] at the same time. Before traveling, make sure to press [POWER] and wait for antenna
to start to power up. Then press [POWER] again to initiate the stow sequence. See page 4 for more information on stowing before traveling.
Continue to page 3 if setting up the receiver for the first time or if setting up the receiver after moving the receiver from the house to the RV. If the receiver is already set up in the RV, you are now ready to watch TV!
Operation | 1 |
