Wolf Gas Cooktops | 3 |
Gas Cooktop Installation
IMPORTANT NOTE: This installation must be completed by a qualified installer, service agency or gas supplier.
Read this entire installation guide prior to installation and save for the local inspector’s reference. The homeowner should keep this installation guide for future reference.
This appliance must be installed in accordance with National Electrical Codes, as well as all state, municipal and local codes. The correct voltage, frequency and amperage must be supplied to the appliance from a dedi- cated, grounded circuit which is protected by a properly sized circuit breaker or time delay fuse. The proper voltage, frequency, and amperage ratings are listed on the product rating plate.
Wolf gas cooktops are manufactured for use with natural gas or LP gas. Check the product rating plate for the type of gas for your specific model.
Record the model and serial numbers before installing the gas cooktop. Both numbers are listed on the product rating plate, located on the underside of the cooktop. Refer to the illustration below.
RATING PLATE |
Location of rating plate.
wolfappliance.com/specs
Wolf Gas Cooktop
Model Number
Serial Number
