1028360 HOSE KIT
Install Fittings and Hose
1028360 Hose Kit is used to connect backhoe | 1. | 1028358 | Hose, 60" x 3/8 NPTM x 7/8 JICM | |
hydraulic hoses to the tractor rear hydraulic valve and | 4. | 1010920 | Adapter, M22 x 3/4 JICM | |
the Woods loader control valve. | 5. | 315036 | Adapter, 3/8 NPTM x 3/4 JICF | |
|
| |||
1. | Attach adapter (4), adapter (5) and female quick | 6. | 64299 | Quick coupler, female 3/8 |
| coupler (6) into the opening on the hydraulic valve | 7. | 64300 | Quick coupler, male 3/8 |
| at the rear of the axle. |
|
|
|
2. | Attach male quick coupler (7) to hose (1). |
|
|
|
3. | Attach opposite end of hose (1) to the PBY hose |
|
|
|
| from the loader control valve. |
|
|
|
4. | Route hose (1) over rear axle and out the back of |
|
|
|
| the tractor. |
|
|
|
4
5
6
DP5
Figure 10. Hydraulic Valve Fittings Installed
DP10
Figure 11. Bulkhead Bracket Installation
Install Hoses to Backhoe Valve
1.Attach adapter (3) to the IN and OUT ports on the backhoe control valve.
2.Attach female quick coupler (6) to hose (2). Attach opposite end of hose to the IN port on the backhoe valve.
3.Attach male quick coupler (7) to second hose (2). Attach opposite end of hose to the OUT port of backhoe valve.
2.1013325 Hose, 48" x 3/8 NPTM x 3/4 JICF
3.316016 Adapter, 3/4 JICM x 7/8 ORBM
6.64299 Quick coupler, female
7. 64300 Quick Coupler, male | Figure 12. Backhoe Hose Connection |
|
MAN0715 (Rev. 10/31/2008) | Installation 9 |
|
|
