14 Installation
MAN0715 (rev. 10/31/2008)
STORAGE
Connect Hydraulic Hoses
NOTICE■ Failure to connect hoses together will result
in damage to tractor hydraulic system.
Tractor & Woods Loader: Connect male quick cou-
pler on end of hose from loader control valve to
female quick coupler in rear hydraulic v alve when
backhoe is removed from tractor. See Figure 18.
Make sure 3-point lift arms do not interfere with hose.
Adjust hose as necessary to prevent interference.
Tractor & New Holland Loader: Connect male quick
coupler on end of hose from loader control valv e to
female quick coupler in the hydraulic hard line below
the tractor seat when backhoe is removed from trac-
tor. See Figure 19
BACKHOE: Connect IN and OUT quick couplers
together to prevent dirt and debris from accumulating
in quick couplers. See Figure 20.
Figure 18. Hose Connection - Backhoe Removed
Woods Loader
Figure 19. Hose Connection - Backhoe Removed
New Holland Loader
Figure 20. Backhoe Hose Connection
Attach 3-Point Arms
Lower 3-point lift arms and anti-sway links can be
used on tractor when backhoe is removed.
Attach 3-point lift arms anti-sway links using the nor-
mal tractor connection.
Secure anti-sway links to tractor using sway link pins
and safety pins (22) provided in kit.
22. 15036 Safety pin, 3/16
DP10
Loader PBY
Hose
DP9