10 Installation
MAN0715 (rev. 10/31/2008)
1029730 HOSE KIT

Install Fittings

1029730 Hose Kit is used to connect backhoe
hydraulic hoses to the tractor hydraulic line and the
New Holland loader control valve.
1. Disconnect the loade r control valve PBY hose
from the hydraulic hard line below the tractor
seat.
2. Attach adapter (2), adap ter (6) and female quick
coupler (4) to the hydraulic hard line (Figure 13).
3. Attach adapter (3), adapter (6) and male quick
coupler (5) to the PBY hose from the loader con-
trol valve.
4. Route PBY hose over rear axle.
2. 1002613 Adapter, M22 x 1.5 x 3/4 JICM
3. 1010920 Adapter, M22 x 1.5 x 3/4 JICM
4. 64299 Quick coupler, female 3/8
5. 64300 Quick coupler. male 3/8
6. 315036 Adapter, 3/8 NPTM x 3/4 JICF
7. 316016 Adapter, 3/4 JICM x 7/8 ORBM
Figure 13. Hydraulic Fitting Installed
Figure 14. Hydraulic Fitting Installation

Install Hoses to Backhoe Valve

1. Attach adapter (7) to the IN and OUT ports on the
backhoe control valve.
2. Attach female quick coupl er (4) to hose (1).
Attach opposite end of hose to the IN port on the
backhoe valve.
3. Attach male q uick coupler (5) to second hose (1).
Attach opposite end of hose to the OUT port of
backhoe valve.
1. 1029729 Hose, 72" x 3/8 NPTM x 3/4 JICF
4. 64299 Quick coupler, female
5. 64300 Quick Coupler, male
7. 316016 Adapter, 3/4 JICM x 7/8 ORBM Figure 15. Backhoe Hose Connection
4
6
2
DP10