Install Right and Left Front Mounts
1.Install right (4) and left front mounts (5) to front of tractor using eight (four per side) cap screws (7), flat washers (10), and hex nuts (8).
2.Position cap screws on the outside of mount with flat washers and hex nuts on the inside of tractor frame.
4.1034180 Right front mount
5.1034181 Left front mount
7.307301 M12 x 1.75P x 40 mm HHCS
8.307813 M12 x 1.75 Hex nut
10.57816 1/2 Hardened flat washer
Figure 4. Front Mount Installation
Install Side Rails
1. | Attach front end of right side rail (3) to outside of | 1. | 1019010 | Right rear mount |
| front mount (4). | 3. | 1019013 | Side rail |
2. | Secure with two carriage bolts (9), flat washers | 4. | 1019018 | Right front mount |
| (11), and hex nuts (6). | 6. | 230 | 5/8 Hex nut |
3. | Attach side rails to the inside (between tractor | 9. | 5607 | 5/8 NC x |
| and mount) of right rear mount (1) using three | 11. | 57817 | 5/8 Hardened flat washer |
| carriage bolts (9), flat washers (11), and hex nuts |
|
|
|
| (6). |
|
|
|
4.Repeat steps for installation of left side rail.
Figure 5. Right Side Rail Installation | Figure 6. Left Side Rail Installed |
6 Mount Installation
(Rev. 9/29/2011) MAN0426 (3/3/2006)