Cisco Systems CiscoWorks2000 Installing ACL Manager on Windows, Installing the ACL Manager Server

Chapter 1 Installing ACL Manager

Installing ACL Manager on Windows 2000

Installing ACL Manager on Windows 2000

This section describes how to install ACL Manager on Windows 2000.

Note You have to be the administrator of the system or have admin privileges to perform installation.

Installing the ACL Manager Server

To install the ACL Manager server:

Step 1 Make sure your system meets all of the requirements described in the “Windows 2000 Requirements” section on page 1-2.

Step 2 Close all applications.

Step 3 Insert the ACL Manager CD into your CD-ROM drive.

Step 4 Launch Windows Explorer, and double-click the CD-ROM drive icon.

Note You can click Cancel to end the installation at any time. If you end the installation before it is complete, you must begin the installation again from this step.

Step 5 Double-click the setup.exe icon.

If Essentials is not installed, or a correct version of Essentials is not installed, ACL Manager exits with an appropriate message. To install Essentials, follow the instructions in Installation and Set Up Guide for Resource Manager Essentials on Windows 2000.

If you are upgrading from ACL Manager 1.3 to ACL Manager 1.4, the install program prompts you to back up data from the previous release.

If you are installing ACL Manager for the first time, skip to Step 8.

Step 6 Click Yes in the dialog box that asks whether you want to back up your previous data.

A Directory Selection dialog box appears.

	Installation Guide for ACL Manager
78-14158-01		1-5