Torque Hardware
Torque all mounting hardware to specifications given below.
| TORQUE SPECIFICATIONS |
| ||
|
|
| Wrench |
|
Ref | Cap Screw | Qty | Size | Required Torque |
7 | M12 x 1.75P x 40 mm | 8 | 18 mm | 50 |
9 | 5/8 NC x | 10 | 15/16 | 170 |
12 | M16 x 2.0P x 40 mm | 8 | 24 mm | 125 |
|
|
|
|
|
Install Grill Guard (Optional)
1. | Align grill guard (A) with holes on front of tractor | A. | 1019012 | Grill guard - |
| frame and secure into position using four cap |
|
| (Includes hardware B, C & D) |
| screws (B), hardened flat washers (D), and hex | B. | 307301 | M12 x 1.75P x 40 mm HHCS |
| nuts (C). | C. | 307813 | M12 x 1.75 Hex nut |
|
| |||
2. | Torque to 50 | D. | 57816 | 1/2 Hardened flat washer |
|
|
|
| |
|
|
|
| |
| Figure 7. Grill Guard Installation |
| Figure 8. Grill Guard Installed |
As a valued customer, Woods appreciates your comments. Once loader mount and hydraulic hoses have been installed, please take a few minutes to complete the Loader Mount Evaluation sheet that was supplied with this mount. Your comments will help us continue to bring you quality products.
MAN0426 (3/3/2006) | Mount Installation 7 |
|
|