211718 LOADER MOUNTING KIT
CAUTION
■Only use 211718 Loader Mounting Kit for mounting Woods 1009 and 1012 loaders on Mahin-
dra® 2815 and 3215 tractors. Any other use or mod- ification of these mounting kits may result in serious injury or death.
Safety instructions are important! Read all attachment and power unit manuals; follow all safety rules and safety decal information. (Replace- ment manuals and safety decals are available from your dealer. To locate your nearest dealer, check the Dealer Locator at www.WoodsEquipment.com, or in the United States and Canada call
Always wear relatively tight and belted clothing to avoid getting caught in moving parts. Wear sturdy,
IMPORTANT
■This equipment must be assembled and installed on the customer’s tractor by the Woods dealer. Dealer must thoroughly inspect equipment and complete each item on the
■Clean threaded holes in the tractor chassis thoroughly, using a tap of the proper size. Paint, rust, or debris in the threads may not permit cap screws to be installed and tightened correctly.
Tractor Preparation
For installing this mounting kit, references to right, left, forward, and rearward directions are determined from the operator’s position in the tractor seat.
Leave all hardware loose until loader mount is com- pletely assembled. When assembly is completed, torque hardware to specifications listed on page 8 of this manual.
1.Shut off engine and set parking brake during installation.
2.Remove the tractor front weights and front weight bracket, if equipped.
As a valued customer, Woods appreciates your comments. Once loader mount and hydraulic hoses have been installed, please take a few minutes to complete the Loader Mount Evaluation sheet that was supplied with this mount. Your comments will help us continue to bring you quality products.
4 Mount Installation | MAN0530 (6/30/2006) |
|
|
