Install Cross Brace
1.Place cross brace (3) between right (5) and left
(6) rear rails and right (1) and left (2) rear mounts.
2.Secure parts together using six cap screws (10) (three per side), hardened flat washers (13), and hex nuts (15).
1. 1020638 Right rear mount (not shown)
2. 1020639 Left rear mount
3. 1020646 Cross brace
5. 1020650 Right rear rail
6. 1020651 Left rear rail
10. 33757 M14 x 2.0P x 60 mm HHCS
13. 46070 9/16 Hardened flat washer
15. 307825 M14 x 2.0P Hex nut
Figure 5. Cross Brace Installation
MAN0530 (6/30/2006) | Mount Installation 7 |
|
|
