Install Hydraulic Fittings to Tractor
IMPORTANT
■Incorrect installation can damage tractor hydraulic system. Read and understand instructions in tractor manual before connecting.
1.Locate the hydraulic manifold block on the right side of the tractor chassis, below and in front of the operator’s platform.
2.Remove three hex head pipe plugs from manifold block ports.
NOTE: Use thread sealant on all pipe thread connections and tighten securely to prevent leaks.
3.Install adapters (2) and elbows (3) into the T (RETURN), N (PBY), and P (PRESSURE) ports on the hydraulic manifold. See Figure 16.
4.Position elbows to point up and slightly to the front.
2.315045 Adapter, 3/8 BSPTM x 3/8 NPTF
3.44552 Elbow, 3/8 NPTM x 9/16 JICM 45°
T
P
N
DP5
Figure 15. Tractor Hydraulic Manifold
2 
DP6 | 3 |
|
|
| Figure 16. Hydraulic Fittings Installed |
Figure 17. Hydraulic Fitting Installation
10 Hydraulic Installation | MAN0530 (6/30/2006) |
|
|
