Install Right and Left Rear Mounts
1.Using a lifting device, align right mount (1) with holes on tractor mounting pad.
2.Secure right mount to mounting pad using four cap screws (11) and hardened flat washers (13). See Figure 1 and Figure 2.
3.Secure mount to tractor frame using four cap screws (7) and hardened flat washers (13).
4.Repeat steps to install left rear mount (2).
13
11
DP1 | 13 |
7
Figure 1. Right Rear Mount Installed
1.1020638 Right rear mount
2.1020639 Left rear mount
7. 1020669 M14 x 1.5P x 110 mm HHCS
11.34635 M14 x 2.0P x 40 mm HHCS
13.46070 9/16 Hardened flat washer
Figure 2. Right and Left Rear Mount Installation
MAN0530 (6/30/2006) | Mount Installation 5 |
|
|
